NETWORKING

MEDIA CONVERTERS

Migrate from analog to IP transmission easily and cost-effectively with IFS media converters, designed for coax, twisted-pair and fiber optics installations.

Fiber to Ethernet Media Converters w/PoE Injector

The Fiber to Ethernet Media Converters with PoE Injectors provide a cost-effective solution for deploying remote PoE powered edge devices with optical fiber.

  • 10/100Base-TX

  • Complies w/IEEE 802.3, IEEE 802.3u

  • Auto-negotiation and MDI/MDI-X

  • Complies w/IEEE 802.3-af

  • Inserts 48VDC (15.4w) Power on Category Network Cable

  • Protects Non-PoE Devices if Accidentally Connected

  • 100Base-FX

  • Multi-mode or Single Mode Versions

  • Distances Up to 15km

  • Plug-and-Play Installation

  • Compact Size

  • Auto Loop Back Test Function

  • 3-Year Warranty

MCR Chassis

Media Converter Rack w/Internal Power Supply (15 slots)

The MCR Series Media Converter Rack offers a low-profile (2.4U) design for efficient, high-density media converter installation in a standard EIA 19" rack. The chassis can accommodate up to 15 media converter modules from the MCR Series family of media converters for Fast or Gigabit Ethernet transmission over optical fiber or coaxial cable.

  • Robust Design: Standard EIA 19"

  • Plug-and-Play Design

  • Hot-swappable

  • Built-in Diagnostic Indicators

  • Convenient Universal 100~240VAC Power Supply

  • Two Rear Panel Power Bays for Redundant Power Supply Operation

  • Electrically Isolated Power Bays for Highly Reliable Operation

  • Built-in Protection from Over-voltage, Over-current and Short-circuit Faults

  • 3-Year Warranty

Fast Ethernet to SFP Managed Media Converter

  • 10/100 Base-TX

  • Complies w/IEEE 802.3, IEEE 802.3u

  • Auto-negotiation and MDI/MDI-X

  • 10/100Base-TX: 2-Pair Cat. 3/4/5 UTP Cable, Up to 100 meters

  • IEEE 802.3u 100Base-FX Standard

  • 1 SFP Slot Provides Custom Configuration

  • Optical Fiber and Distance Varies by SFP (ordered separately)

  • Compact size, Plug-and-Play Installation

  • Unified Design for Stand-alone or Rack-mount Installation (MCR-R15 chassis)

  • LED Indicators for Easy Local Network Diagnostics

  • Firmware Upgradable via Remote Web Interface

  • Reset Button to Reset to Factory Default

  • 3-Year warranty

Gigabit Ethernet to SFP Media Converters

  • 10/100/1000Base-TX

  • Complies w/IEEE 802.3 10Base-T; IEEE 802.3u 100Base-TX; and IEEE 802.3ab 1000Base-T

  • Auto-negotiation and Auto-MDI/MDI-X

  • Half-duplex or Full-duplex for 10/100Mbps; Full-duplex for 1000Mbps

  • IEEE 802.3z 1000Base-LX/SX Standards

  • Optical Fiber and Distance Varies by SFP (ordered separately)

  • Compact Size, Plug-and-Play Installation

  • LED Indicators for Easy Local Network Diagnostics

  • DIP-switch for LFP Function (Enable / Disable) Setting

  • Unified Design for Stand-alone or Rack Mount Installation (MCR-R15 chassis)

  • 3-Year Warranty

Fast Ethernet to SFP Industrial Media Converter

  • 10/100Base-T

  • Complies w/IEEE 802.3, IEEE 802.3u, IEEE 802.3ab

  • Auto-negotiation and MDI/MDI-X

  • IEEE 802.3u, 100Base-FX Standard

  • 1 SFP Slot Provides Custom Confguration

  • Optical Fiber and Distance Varies by SFP (ordered separately)

  • Plug-and-Play Installation

  • LED Indicators for Easy Local Network Diagnostics

  • Slim IP30 Metal Enclosure

  • DIN-rail or Wall-mounting

  • 12~48VDC, Redundant Power w/Reverse-polarity Protection

  • 3-Year Warranty

4-Port Ethernet to Fiber Industrial Media Converters

Ethernet to Fiber Industrial Media Converters offer four 10/100Mbps Ethernet ports and 100Base-FX transmission on either multi-mode or single mode optical fiber for optimum bandwidth usage. Specifically designed for stable and reliable operation in electrically harsh and climatically demanding environments, the module's slim, IP-30 standard metal case accommodates DIN-rail or wall mounting for efficient installation in multiple applications.

  • 4-Port 10/100Base-TX

  • Auto MDI/MDI-X

  • Auto-negotiation

  • 1-Port 100Base-FX MM or SM Fiber

  • 2-Port 100Base-FX MM Fiber (MC-4TX2FX only)

  • Complies w/the IEEE 802.3, IEEE 802.3u, Fast Ethernet Standard, Store-and-Forward Switching Architecture w/Wire-speed Filtering and Forwarding Rates

  • Prevents Packet Loss w/Back Pressure (half-duplex) and IEEE 802.3x PAUSE Frame-flow Control (full-duplex)

  • Slim IP-30 Metal Enclosure for Protection

  • Provides Either DIN-rail or Wall-mounting

  • 12~48VDC, Redundant Power w/Reverse-polarity Protection

  • 3-Year Limited Warranty

4-Port Ethernet to SFP Industrial Media Converters

Ethernet to SFP Industrial Media Converters offer four 10/100Mbps Ethernet ports and 100Base-FX transmission on either multi-mode or single mode optical utilizing SFP technology. Specifically designed for stable and reliable operation in electrically harsh and climatically demanding environments, the module's slim, IP-30 standard metal case accommodates DIN-rail or wall mounting for efficient installation in multiple applications.

  • Store-and-Forward Switching Architecture w/Wire-speed Filtering and Forwarding Rates

  • Prevents Packet Loss w/Back Pressure (half-duplex) and IEEE 802.3x PAUSE Frame-flow Control (full-duplex)

  • Integrated Address-lookup Engine Supports 2K Absolute MAC Addresses

  • Up to 4 IEEE 802.3-af Devices Powered Complies w/IEEE 802.3af Power over Ethernet End-Span PSE

  • Complies w/IEEE 802.3-af Power over Ethernet End-Span PSE

  • Supports Up to 15.4 watts for Each PoE port

  • Slim IP-30 Metal Enclosure for Protection

  • Provides Either DIN-rail or Wall-mounting

  • Redundant Power w/Reverse-polarity Protection

  • 3-Year Limited Warranty

Gigabit Ethernet to SFP Industrial Media Converters

These Gigabit Ethernet to SFP Industrial Media Converters are designed for the most demanding IP network applications offering the flexibility of SFP technology and wide operating temperature range. The MC352-1P/1S model provides full IEEE802.3-at (30w) PoE and serves as a PSE device.

  • 10/100/1000 Base-T

  • Complies w/IEEE 802.3, IEEE 802.3u, IEEE 802.3ab

  • Auto-negotiation and MDI/MDI-X

  • Supports Fast or GigE SFPs

  • SFP Slots Provide for Custom Configuration

  • Optical Fiber and Distance Varies by SFP (ordered separately)

  • Complies w/IEEE 802.3-at

  • Inserts 52VDC (30w) Power on Category Network Cable

  • Protects Non-PoE Devices if Accidentally Connected

  • Plug-and-Play Installation

  • LED Indicators for Easy Local Network Diagnostics

  • Firmware Upgradable via Remote Web Interface

  • Slim IP30 Metal Enclosure

  • DIN-rail or Wall-mounting

  • Redundant Power w/Reverse-polarity Protection

  • 3-year Warranty

4-Port Gigabit to 2-Port SFP Industrial Media Converters

These Gigabit Ethernet to SFP Industrial Media Converters are designed for the most demanding IP network applications offering the flexibility of SFP technology and wide operating temperature range. The MC352-4P-2S model provides full IEEE802.3-at (30w) PoE and serves as a PSE device.

  • 10/100/1000 Base-T

  • Complies w/IEEE 802.3, IEEE 802.3u, IEEE 802.3ab

  • Auto-negotiation and MDI/MDI-X

  • Supports Fast or GigE SFPs

  • 2 SFP Slots Provide for Custom Configuration

  • Optical Fiber and Distance Varies by SFP (ordered separately)

  • Complies w/IEEE 802.3-at

  • Inserts 52VDC (30w) Power on Category Network Cable

  • Protects Non-PoE Devices if Accidentally Connected

  • Plug-and-Play Installation

  • LED Indicators for Easy Local Network Diagnostics

  • Firmware Upgradable via Remote Web Interface

  • Slim IP30 Metal Enclosure

  • DIN-rail or Wall-mounting

  • Redundant Power w/Reverse-polarity Protection

  • 3-Year Warranty

Power over Coax - PoE-at Media Converter

The Power over Coax - PoE-at Media Converters are designed to extend both Ethernet data and PoE over existing coax cable up to 1Km (3,280 ft). This Power over Coax solution consists of a transmitter and receiver set, which works as a pair with or without a power adaptor depending on the installation configuration and power requirements needed. 

  • Cost-effective VDSL2 CO/CPE Bridge Solution

  • CO/CPE Selectable via DIP-switch

  • Selectable Target Data Rate and Target SNR Margin

  • 10/100Mbps Ethernet

  • Auto-negotiation and Auto-MDI/MDI-X

  • Half-duplex Back Pressure and IEEE802.3x Full-duplex Pause-frame Flow Control

  • Complies w/IEEE 802.3-at

  • Inserts 52VDC (30w) Power on Coax (dependent on power source and coax distance)

  • Protects Non-PoE Devices if Accidentally Connected

  • Plug-and-Play Installation

  • Compact Size

  • Supports 50 or 75 ohm Coax

  • IP30 Metal Enclosure

  • Wall-mountable

  • 52~56VDC Operation

  • 3-Year Warranty